Results 1 to 11 of 11

Thread: Making an E Collar

Hybrid View

  1. #1
    Join Date
    Sep 2008
    Location
    New York
    Posts
    43,984
    Thanked: 21577

    Default Making an E Collar

    Jackie had posted this in another thread.
    I couldn't just move the one post, but I wanted to acknowledge her for
    providing this graphic on making an e collar.
    Thank You Jackie in Tampa


    How to Make a Shot-Glass Style E-Collar


    My Gizmo wearing an E-Collar after being neutered
    Deep Appreciation is given to Jen Bailey (GC's Xfilefan) for these illustrated directions
    Step 1: Trace template onto clear plastic notebook cover, then cut out.






    Step 2: 1 sheet Dr. Scholl's Molefoam: cut 2 strips ¼” along long edge.






    Step 3: Remove one adhesive strip and stick one on top of another leaving one adhesive strip for later.





    Step 4: Cut ¾” off of dual layer molefoam- remove backing and adhere to clear plastic as shown.





    Step 5: 1 sheet Dr. Scholl's Moleskin- cut a strip 1-3/8” wide down length





    Step 6: Cut slits ½” deep at ½ “ intervals down length




    Step 7: Turn collar over, molefoam side down. Remove backing from moleskin. Affix uncut edge to collar- about ¼” of it



    Step 8: From the middle of moleskin- wrap around over molefoam, maintaining contours. Trim excess moleskin from edge.



    Step 9: Cut 1/2” strip from moleskin



    Step 10: Remove backing and adhere over slitted mole skin.




    Step 11: Cut 1 strip 1-3/4” long X 5/8” wide



    Step 12: Remove backing and place on edge of collar




    Step 13: Wrap around edge of collar




    Step 14: Apply a small amount of duct tape, Fold a small amount of duct tape over to make a tab for easy removal.



    These photos show the finished e-collar...




    Shot Glass-Style Template





    E-Collar Template
    Courtesy of Dawn & Bourbon from the Self-Mutilator Site

    This template is for a shot-glass style E-Collar
    For a true-to-size print out of this template, along with complete instructions on making an e-collar, please Click Here!



    Putting E-Collar On





    How to Put an E-Collar on Your Glider
    Step 1: Cut a strip of duct tape about 1.5" wide, then fold 1/4" over and stick to itself, making a tab for easy removal. Set this piece aside (I stick just a bit of it to the edge of my kitchen counter). Then, cut another strip of duct tape about 1" wide, then fold 1/4" over and stick to itself. Set this piece aside also.



    Step 2: Place 1.5" wide strip of duct tape along edge of E-Collar, as shown, keeping folded over tab exposed at unattached end.






    Step 3: Having an assistant hold glider securely, wrap E-Collar around glider's neck, overlapping edges of collar, then stick the duct tape to the overlapped edge, rubbing down along duct tape to ensure secure attachment of tape.




    Step 4: Attach 1" strip of duct tape to inside of collar about half-way down length, as shown, keeping folded over tab exposed at unattached end.





    Step 5: Fold duct tape over and attach to outside of e-collar, rubbing down along duct tape to ensure secure attachment of tape.

  2. 3 TSBers pass along the fuzzy thanks to Nancy in New York:

    awolf (04-15-2017), cava (04-15-2017), Diggie's Friend (02-27-2018)

  3. #2
    Join Date
    Sep 2013
    Location
    Bandung, West Java, Indonesia
    Posts
    34
    Thanked: 0

    Default Re: Making an E Collar

    why sugar glider should wear that E collar? just wondering

  4. #3
    Join Date
    Nov 2016
    Location
    Northern California
    Posts
    338
    Thanked: 203

    Default Re: Making an E Collar

    ik sugar gliders can get neutered, but i've heard that its life threatening for fs. is this true if i were to make one of these for him???

  5. #4
    Join Date
    Oct 2011
    Location
    Florida
    Posts
    11,423
    Thanked: 12752

    Default Re: Making an E Collar

    Floppy, a few members here have gotten their flyer neutered. They didn't have a problem. The reason it is not recommended is because 'some' flyers will become obsessed with the surgical wound. They will pick at it, chew it and keep after it until it becomes a life threatening problem. There have been a few flyers that died from being neutered because they ripped and chewed their flesh until it was so massive.... well... With that said, I do know of a member that has had at least 3 flyers neutered without a problem. I have chosen to NOT neuter my males. I just can't risk it.

    It is almost impossible to keep an e-collar on a flyer. Flyers also have a tendency to have seizures when stressed so I'm not will to try it. It's a decision everyone has to make for themselves. For me... it's a NO.

  6. 2 TSBers pass along the fuzzy thanks to HRT4SQRLS:

    gunpackingrandma (04-08-2017), LR (02-27-2018)

  7. #5
    Join Date
    Nov 2016
    Location
    Northern California
    Posts
    338
    Thanked: 203

    Default Re: Making an E Collar

    Ok! I understand and I want to do the best for him without any risk. I just wanted to know thanks!

  8. Serious fuzzy thank you's to Floppysquirrel04 from:

    LR (02-27-2018)

  9. #6
    Join Date
    Dec 2017
    Location
    Canada, QC
    Posts
    38
    Thanked: 24

    Default Re: Making an E Collar

    Would anyone know how to wrap this around a semi-wild squirrel that has no intention of allowing you to?

  10. Serious fuzzy thank you's to threenigma from:

    LR (02-27-2018)

  11. #7
    Join Date
    Nov 2017
    Location
    Florida
    Posts
    1,050
    Thanked: 1652

    Default Re: Making an E Collar

    Quote Originally Posted by threenigma View Post
    Would anyone know how to wrap this around a semi-wild squirrel that has no intention of allowing you to?
    I assume this is a Gray or Fox? I just addressed this in another post. Try a reverse collar. Harder to pry off with a squirrels strong hind legs but must be snug between the upper ribcage and underarms. Any seam/velcro must face the spine. If it's a serious injury with risk of re-injury a mild vet prescribed sedative may help keep the squirrel calm. Not sure if you can get that in Canada - probably not.

    Reverse Collar

    Name:  ReverseCollar.jpg
Views: 1419
Size:  120.3 KB

  12. Serious fuzzy thank you's to SophieSquirrel from:

    LR (02-27-2018)

  13. #8
    Join Date
    Dec 2017
    Location
    Canada, QC
    Posts
    38
    Thanked: 24

    Default Re: Making an E Collar

    Quote Originally Posted by SophieSquirrel View Post
    I assume this is a Gray or Fox? I just addressed this in another post. Try a reverse collar. Harder to pry off with a squirrels strong hind legs but must be snug between the upper ribcage and underarms. Any seam/velcro must face the spine. If it's a serious injury with risk of re-injury a mild vet prescribed sedative may help keep the squirrel calm. Not sure if you can get that in Canada - probably not.

    Reverse Collar

    Name:  ReverseCollar.jpg
Views: 1419
Size:  120.3 KB
    This is a very good idea. Thank you.

  14. Serious fuzzy thank you's to threenigma from:

    Diggie's Friend (02-28-2018)

  15. #9
    Join Date
    Jul 2016
    Location
    KY
    Posts
    4,343
    Thanked: 6130

    Default Re: Making an E Collar

    Quote Originally Posted by threenigma View Post
    Would anyone know how to wrap this around a semi-wild squirrel that has no intention of allowing you to?

    Will you be able to get it off later on? What's going on with him/her?

  16. Serious fuzzy thank you's to cava from:

    LR (02-27-2018)

  17. #10
    Join Date
    Apr 2017
    Location
    West Coast
    Posts
    3,628
    Thanked: 3415

    Default Re: Making an E Collar

    If you are going to neuter, you better make sure your squirrel has passed sexual maturity, for a recent study in neutered rats showed that the lowering of testosterone resulted in the loss of calcium in the bones, and led to early onset osteporosis, aka MBD.

    If neutering is done it has to be with older males that are past sexual maturity by a number of months, in rats sexual maturitis noted to be 7 mo. and full bone mineralization at 10-months, in tree squirrels likely about 1 1/2 to two 2 years of age. It was obvious to us at that our girl's skull increased in size from one to two years of age .

    Here is the study:

    https://www.ncbi.nlm.nih.gov/pmc/articles/PMC2707131/

    "The Laboratory Rat as an Animal Model for Osteoporosis Research”

    Pavlos P Lelovas,1 Theodoros T Xanthos,2 Sofia E Thoma,1 George P Lyritis,1 Ismene A Dontas

    https://www.ncbi.nlm.nih.gov/pmc/articles/PMC2707131/

    We had a male that the veterinarian recommended be neutered at 6 months of age due his to aggression with the female. We waited to about 8 months and the procedure went fine with no major complications. Yet in two years he passed due to what appeared to be complications from MBD, refusing to eat, but not refusing water having had blood tests which found no pathogens present. The Vet though it was an internal tumor, yet didn't do x rays to verify his assumption If he has he might have seen the evidence of MBD. He had assume that for reason altering works well for dogs and cats and dogs would result in rodents, but he was wrong!!

    Our girl was spayed at 7 1/2 due to getting repeated yeast infections, in a years she had symptoms of MBD having reached her spine, with degenerative disc disease due to slow onset MBD that was verified with an x-ray.

    If you alter these animals a significant increase in calcium is needed. The problem there is that to increase calcium using feed increase calories to much causing obesity to develop. Using inorganic phosphorus sources to support a higher intake of calcium at 2:1 some veterinarians note as risky, for inorganic forms of phosphorus hve been found to be directly related to the development of Calcium phosphate bladder stones that present in middle age.

  18. Serious fuzzy thank you's to Diggie's Friend from:

    LR (02-27-2018)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •